Unlike traditional flexible seatpost, the BLAADE concentrates its shock absorption in a Split-Carbon head to dissipate shocks without any unwanted oscillation. Active filtration with high structural density: 150g on the scales for a validated payload of 120kg.
The BLAADE seatpost merges mechanical compliance with high structural tolerance. Unlike traditional flexible seatposts whose behavior varies depending on the exposed length, the BLAADE concentrates its filtration on its upper Split-Carbon architecture. The main tube retains absolute static stiffness for optimal power transfer, while the independent dual leaf springs act as a stress dissipator.
The carbon layup is specifically calibrated to provide critical damping: it absorbs sharp impacts without generating parasitic oscillation (rebound) at high pedaling cadences. The compression kinematics strictly maintain a level saddle, ensuring constant biomechanical stability. A technical execution validated by numbers: this seatpost weighs only 150g for a maximum supported load of 120kg.
Key Points
Zoned architecture: Lower tube with maximum stiffness and a Split-Carbon head dedicated to high-frequency filtration.
Anti-oscillation: Shockwave dissipation without parasitic rebound effect.
Superior weight-to-strength ratio: 150g for a 120kg load (rider).
Saddle level stability: Strict maintenance of the saddle angle under load.
Centralized interface: Clamping and adjustment managed by a single black anodized TC4 titanium bolt.
Compatibility
The BLAADE is available in 27.2 mm and 31.6 mm standards to fit your frame. It is supplied as standard with two sets of carbon adapters for clamping round rails (steel/titanium) and oval rails (carbon).
The single-bolt titanium cradle simplifies installation by managing insertion depth, offset, and tilt simultaneously, ensuring a precise adjustment.
Technical Specifications
Product Name
BLAADE
Brand
CYKL
Weight
150 g (+/- 8 g) in 27.2 mm / 162 g (+/- 8 g) in 31.6 mm
Maximum recommended load
120 kg
Activity
Cycling
Discipline
Road, Gravel, Cyclocross, XC MTB
Finish
Matte clear coat carbon
Structural Material
Carbon Torey 800/1000
Hardware Material
Black anodized TC4 Titanium
Diameter
27.2 mm or 31.6 mm
Tube Length
350 mm
Minimum Insertion
100 mm
Offset
5 mm
Torque Spec
8–12 Nm
FAQs
Vous avez une question ? Nous sommes là pour y répondre.
